Compact 11-port PoE switch for IP cameras and access points. It provides eight 10/100 Mbps PoE ports
plus two Gigabit RJ45 uplinks and one Gigabit SFP, with VLAN/Extend modes for long-run installs.
Built-in AC power supply and a 12V/3A DC output simplify field deployments.
-
8× PoE ports – IEEE 802.3af/at, up to 30 W per port for cameras, APs, phones.
-
Gigabit uplinks – 2× 10/100/1000 Mbps RJ45 + 1× 1G SFP for backhaul.
-
Extend & VLAN – Up to 250 m at 10 Mbps in Extend mode; port-isolation VLAN mode.
-
Simple status – Power, VLAN, per-port link/activity/PoE indicators.
-
Install-friendly – Built-in AC PSU and auxiliary 12 VDC / 3.0 A output.
Technical Specifications
| Parameter |
Value |
| Model |
— (11-port PoE switch) |
| PoE Ports |
8 × 10/100 Mbps RJ45, 802.3af/at, max 30 W/port |
| Uplink Ports |
2 × 10/100/1000 Mbps RJ45 + 1 × 1G SFP |
| Modes / Indicators |
Extend/VLAN selector & LED; Power LED; per-port link/PoE LEDs |
| Network Standards |
IEEE 802.3i/802.3u/802.3x; PoE IEEE 802.3af/at |
| Switching Capacity |
5.6 Gbps (full-duplex) |
| Forwarding Rate |
0.1488 Mpps per port (store-and-forward) |
| MAC Address Table |
2K |
| PoE Pinout |
1/2(+), 3/6(−); MDI/MDIX auto |
| Transmission Distance |
Default: 0–100 m @ 100 Mbps; Extend: 0–250 m @ 10 Mbps |
| Aux Output |
12 VDC / 3.0 A (DC port) |
| Power Input |
AC 100–240 V, 50/60 Hz (built-in PSU) |
| Battery (internal) |
LiFePO₄ 6,000 mAh × 4 (charge before first use) |
| Operating Temp |
0 – 45 °C |
| Storage Temp |
−10 – 45 °C |
| Humidity |
30% – 90% RH, non-condensing |
| Dimensions (L × W × H) |
330 × 238 × 46 mm |
| Weight |
2.5 kg (excluding cable & packaging) |
| Front Controls |
Power switch; Extend/VLAN selector |
| Typical Applications |
IP cameras, WLAN APs, IP phones, access control |
