Skip to content
Roll over image to zoom in
Click on image to zoom
- Filament Type: PLA-CF (Carbon Fiber Reinforced PLA)
- Filament Diameter: 1.75 mm ± 0.03 mm
- Net Weight: 1 kg per spool
- Surface Finish: Matte with minimal layer lines
- AMS Compatible: Fully compatible with AMS and AMS Lite
- Recommended Nozzle Temperature: 210–240 °C
- Bed Temperature: 35–45 °C (with glue)
- Maximum Print Speed: Below 200 mm/s
- Recommended Nozzle Type: Hardened steel (0.4 mm or larger)
- Compatible Build Plates: Cool Plate, High Temp Plate, Textured PEI Plate
- Drying Conditions: 55 °C for 8 hours
- Storage: Below 20% RH with desiccant
- Density: 1.22 g/cm³
- Tensile Strength: 38 ± 4 MPa
- Elongation at Break: 8.4 ± 3.2%
- Flexural Modulus: 3950 ± 190 MPa
- Flexural Strength: 89 ± 4 MPa
- Impact Strength: 23.2 ± 3.7 kJ/m²
- Vicat Softening Temperature: 69 °C
- Heat Deflection Temperature: 55 °C
- Melting Temperature: 165 °C
- Melt Flow Index: 3.7 ± 0.6 g/10 min
- Spool Material: Reusable ABS (heat-resistant up to 70 °C)
- Ideal for high-strength prototypes and matte-finish models
